;
; alarmreceiver.conf
;
; Sample configuration file for the Asterisk alarm receiver application.
;
[general]
;
; Specify a timestamp format for the metadata section of the event files
; Default is %a %b %d, %Y @ %H:%M:%S %Z
timestampformat = %a %b %d, %Y @ %H:%M:%S %Z
;
; Specify a command to execute when the caller hangs up
;
; Default is none
;
;eventcmd = yourprogram -yourargs ...
;
; Specify a spool directory for the event files. This setting is required
; if you want the app to be useful. Event files written to the spool
; directory will be of the template event-XXXXXX, where XXXXXX is a random
; and unique alphanumeric string.
;
; Default is none, and the events will be dropped on the floor.
;
eventspooldir = /tmp
;
; The alarmreceiver app can either log the events one-at-a-time to individual
; files in the spool directory, or it can store them until the caller
; disconnects and write them all to one file.
;
; The default setting for logindividualevents is no.
;
logindividualevents = no
;
; The timeout for receiving the first DTMF digit is adjustable from 1000 msec.
; to 10000 msec. The default is 2000 msec. Note: if you wish to test the
; receiver by entering digits manually, set this to a reasonable time out
; like 10000 milliseconds.
fdtimeout = 2000
;
; The timeout for receiving subsequent DTMF digits is adjustable from
; 110 msec. to 4000 msec. The default is 200 msec. Note: if you wish to test
; the receiver by entering digits manually, set this to a reasonable time out
; like 4000 milliseconds.
;
sdtimeout = 200
;
; Wait for the connection to settle post-answer. Adjustable from 500 msec. to 10000 msec.
; The default is 1250 msec.
;
answait = 1250
; When logging individual events it may be desirable to skip grouping of metadata
;no_group_meta = yes
;
; The loudness of the ACK and Kissoff tones is adjustable from 100 to 8192.
; The default is 8192. This shouldn't need to be messed with, but is included
; just in case there are problems with signal levels.
;
loudness = 8192
;
; The db-family setting allows the user to capture statistics on the number of
; calls, and the errors the alarm receiver sees. The default is for no
; db-family name to be defined and the database logging to be turned off.
;
;db-family = yourfamily:
;
; End of alarmreceiver.conf
;