[general]
;parkeddynamic = yes ; Enables dynamically created parkinglots. (default is no)
; If the option is enabled then the following
; variables can be used to dynamically create
; new parking lots.
;
; The PARKINGDYNAMIC variable specifies the
; parking lot to use as a template to create
; a dynamic parking lot. It is an error to
; specify a non-existent parking lot for the
; template. If not set then the default
; parking lot is used as the template.
;
; The PARKINGDYNCONTEXT variable specifies
; the dialplan context to use for the newly
; created dynamic parking lot. If not set
; then the context from the parking lot
; template is used. The context is created
; if it does not already exist and the new
; parking lot needs to create extensions.
;
; The PARKINGDYNEXTEN variable specifies the
; parkext to use for the newly created dynamic
; parking lot. If not set then the parkext
; is used from the parking lot template. If
; the template does not specify a parkext
; then no extensions are created for the
; newly created parking lot. The dynamic
; parking lot cannot be created if it needs
; to create extensions that overlap existing
; parking lot extensions. The only exception
; to this is for the parkext extension and
; only if neither of the overlaping parking
; lot's parkext is exclusive.
;
; The PARKINGDYNPOS variable specifies the
; parking positions to use for the newly
; created dynamic parking lot. If not set
; then the parkpos from the parking lot
; template is used.
; A parking lot named 'default' will automatically be used when no other
; named parking lot is indicated for use by the park application or a
; channel's parkinglot function and PARKINGLOT channel variable. This parking
; lot is guaranteed to exist and will be created even if default is left out of
; the configuration file.
[default] ; Default Parking Lot
parkext => 700 ; What extension to dial to park. (optional; if
; specified, extensions will be created for parkext and
; the whole range of parkpos)
;
; Note: Generated parking extensions cannot overlap.
; The only exception is if neither overlapping parkext
; is exclusive.
;parkext_exclusive=yes ; Specify that the parkext created for this parking lot
; will only access this parking lot. (default is no)
parkpos => 701-720 ; What range of parking spaces to use - must be numeric
; Creates these spaces as extensions if parkext is set.
; Since this value is interpreted numerically, leading 0's
; will be ignored (so expect 00700-00720 to map to 700-720)
context => parkedcalls ; Which context parked calls and the default park
;parkinghints = no ; Add hints priorities automatically for parkpos
; extensions if parkext is set
;parkingtime => 45 ; Number of seconds a call can be parked before returning
;comebacktoorigin = yes ; Setting this option configures the behavior of call parking when the
; parked call times out (See the parkingtime option). The default value is 'yes'.
;
; 'yes' - When the parked call times out, attempt to send the call back to the peer
; that parked this call. This is done by saving off the name of the channel
; that parked the call. The call will return to the context 'park-dial' and
; an extension created based on the name of the channel that originally parked
; the call. This extension will be created automatically to do a Dial() to the
; device that originally parked the call for comebacktodialtime seconds. If the
; call is not answered, the call will proceed to the next priority (usually none
; unless you deliberately set up a catch-all second priority in the park-call
; context) in the dialplan for extension matching the peer name (same as how
; peer names are flattened into extensions when comebacktoorigin is 'no').
;
; 'no' - This option is useful for performing custom dialplan functionality prior to
; sending the call back to the extension that initially parked the call, or to
; an entirely different destination.
;
; When the parked call times out, send it back to the dialplan. The location
; will be defined by the comebackcontext option. The extension will be built from
; the saved channel name that parked the call. For example, if a SIP peer named
; '0004F2040001' parked this call, the extension will be 'SIP_0004F2040001'.
; (Note that an underscore is used here because the '/' character has a special
; meaning in extension names for CallerID matching.) If this extension does not
; exist, the call will be sent to the 's' extension, instead. Finally, if the 's'
; extension of 'parkedcallstimeout' does not exist, the call will fall back to the
; 's' extension of the 'default' context.
;
; Additionally, in this example an extension of 'SIP_0004F2040001' will be
; created in the 'park-dial' context. This extension will be set up to do a
; Dial() to 'SIP/0004F2040001'.
;
; During the timeout procedure, the following variables are set
; PARKINGSLOT - extension that the call was parked in prior to timing out
; PARKEDLOT - name of the lot that the call was parked in prior to timing out
; PARKER - dial string to call the device that parked the call
;comebackdialtime = 30 ; When a parked call times out, this is the number of seconds to dial the device that
; originally parked the call. It is also available as a channel variable COMEBACKDIALTIME
; after a parked call has timed out.
; The default value is 30 seconds.
;comebackcontext = parkedcallstimeout
; The context a timed out call will return to if comebcktoorigin=no.
; The default value is 'parkedcallstimeout'.
;courtesytone = beep ; Sound file to play to when someone picks up a parked call
; and also when the Touch Monitor is activated/deactivated.
; Default is no tone.
;parkedplay = caller ; Who to play courtesytone to when picking up a parked call.
; One of: parked, caller, both (default is caller)
;parkedcalltransfers = caller ; Enables or disables DTMF based transfers when picking up a parked call.
; one of: callee, caller, both, no (default is no)
;parkedcallreparking = caller ; Enables or disables DTMF based parking when picking up a parked call.
; one of: callee, caller, both, no (default is no)
;parkedcallhangup = caller ; Enables or disables DTMF based hangups when picking up a parked call.
; one of: callee, caller, both, no (default is no)
;findslot => next ; Sets the method for selecting parking spaces when a call is parked
; 'next' - use the next parking space from the most recently used one.
; 'first' - use the lowest numbered parking space available
;parkedmusicclass = default ; This is the MOH class to use for the parked channel
; as long as the class is not set on the channel directly
; using Set(CHANNEL(musicclass)=whatever) in the dialplan
;*** Define another parking lot
;
; The parkinglot used can be set with the CHANNEL(parkinglot) dialplan function or by
; setting the 'parkinglot' configuration for a channel in its configuration file.
;
; Parking lots can now be any named configuration category aside from
; 'general' which is reserved for general options. They no longer need to be
; prefixed with 'parkinglot_'
;
;[edvina]
;context => edvina_park
;parkpos => 800-850
;findslot => next
;comebacktoorigin = no
;comebackdialtime = 90
;comebackcontext = edvinapark-timeout
;parkedmusicclass = edvina
;
; Since edvina doesn't define parkext, extensions won't automatically be
; created for parking to it or for retrieving calls from it. These can be
; created manually in the dial plan by using the Park and ParkedCall
; applications.